FAQ

Frequently Asked Questions

Is it good to seal pavers in Florida?

For most pavers, yes. Sun fades bare color, rain pulls sand out of the joints and humid air grows algae, and a sealer coat slows all three. You do pay for it again every few years. Want to know if yours are due? book a free estimate.

How much does it cost to seal pavers per square foot?

One Northeast Florida company posts $1.75 to $3.25 per square foot for cleaning, sanding and sealing. On that scale, 600 square feet of driveway runs roughly $1,050 to $1,950. Removing a failed old coat adds to it. Ring (904) 543-3876 for a figure that fits your Riverside property.

How long do paver sealers last?

A Northeast Florida paver company quotes two to five years. Open sun pushes a coat toward two, and shade stretches it toward five. Splash some water on the surface: if it darkens and soaks in rather than beading, the coat is finished. Ring (904) 543-3876 to have a contractor check.

Can brick pavers from the 1920s era be cleaned and sealed in Riverside?

Often they can, provided the bricks are sound. Aged brick drinks more product and tolerates less pressure, and one area price guide says brick and stone cost 15 to 30 percent more than concrete pavers. Cracked or loose bricks get reset beforehand. book a free estimate and have someone examine yours.

Why is paver sealing so expensive?

The labor sits in the prep. Washing, stain treatment, new sand and drying time eat far more hours than the final coat does. The same price guide says bids below $1 per square foot almost always leave out those steps. Ask what a quote includes, or call (904) 543-3876.

Will oak leaves stain my pavers in Riverside?

They can leave brown marks. Western Interlock, a paver maker, ties leaf stains to tannins in the leaves. Frequent sweeping helps, and a mark sealed under a coat is much harder to lift afterward. Point out shady spots under your oaks when you book a free estimate.

Can pool deck pavers be sealed?

They can. A price guide for the area leans toward penetrating products around pools, since a glossy surface film turns slippery when wet. Ask any contractor how they will handle grip. To get your deck looked at, call (904) 543-3876.

How long does a paver sealing job take?

Budget one to two days. A Northeast Florida washing company says empty joints or a worn-out coat stretch the work to two days, because pavers must dry between washing and sealing. A rainy forecast can bump the second day. For your own timeline, call (904) 543-3876.